Mexico
Mexico

EN1001

Controles con Corriente Constante / Múltiples Cedulas

 
 
 
 

Documentación

Folleto: 780048-0414.pdf

Instruction Manuals

Technical Notes

440006: AC Contactor Sizing
451014: Trouble-Shooting Guide
470052: Universal Weld Schedule Worksheet
470097: EN1000/1001 Single Schedule Worksheet
470098: EN1000/1001 50 Schedule Worksheet
700108: Isolation Circuitry Description
700110: Valve Select 1 of 7 Option
700111: Squeeze Delay & Retraction Operation
700114: Half Cycle Option
700118: Using Multiple 2-Stage Foot Switches
700125: Programming Examples
700126: Brazing Applications
700130: Flash and Butt Welding Applications
700140: 232 Options
700149: Water Flow Switch (WFS) Installation
700157: Seam Mode 06
700158: Error Codes
700162: Seam Welding with Constant Current Controls
700171: 485 Options
700174: Multiple Load Distribution Control (LDC)
700178: Integrated Pressure Sense Control System (IPSC)
421417: Wiring Diagram, IPSC, EN1000/EN1001 Controls
700182: Schedule Select S49 Option
700187: Process Output 26
700189: DC Valve Outputs
700199: Field Installation of External Surge Resistors
700200: Welder Interlock Manual
700202: RDH Options
700208: Field Installation of Circuit Breakers
700209: Half Cycle Current Monitoring
700214: Change Valve Transformer in T/D Cabinet from 150VA to 500VA

Wiring Diagrams

E Cabinet
421268: EN1001-Series, E Cabinet
421268-001: EN1001-Series, E Cabinet, 380VAC
421268-002: EN1001-Series/232, E Cabinet
421268-003: EN1001-Series/RDH, E Cabinet
421268-008: EN1001-(IGN)/(SCR), E Cabinet
421268-009: EN1001/VS-Series, E Cabinet
421268-010: EN1001/S49-Series/485, E Cabinet
421268-011: EN1001-Series/485, E Cabinet
421268-012: EN1001/S49-Series, E Cabinet
D/T/LS/LF Cabinet
421269: EN1001-Series, D/T/LS/LF Cabinet
421269-001: EN1001-Series, D/T/LS/LF Cabinet, 380VAC
421269-006: EN1001-Series/232, D/T/LS/LF Cabinet
421269-007: EN1001/VS-Series, D/T/LS/LF Cabinet
421269-014: EN1001-Series/485, D/T/LS/LF Cabinet
421269-018: EN1001/S49-Series, D/T/LS/LF Cabinet
421269-023: EN1001-3200, D/T Cabinet, 380VAC
421269-027: EN1001/1/2/S49-Series, D/T/LS/LF Cabinet
421269-028: EN1001/S49-Series/232, D/T/LS/LF Cabinet
421269-029: EN1001-1200/SP, D/T/LS/LF Cabinet, SP=24VDC Valve Output & Power Supply
421269-030: EN1001/S49/SP-3200/RDH, LS/LF Cabinet, SP=Customer Supplied Circuit Breaker & Contactor Mounting
421269-031: EN1001-Series/485/SP, D/T/LS/LF Cabinet, SP=24VDC Valve Output & Power Supply
421269-033: EN1001/1/2-Series, D/T/LS/LF Cabinet
421269-034: EN1001-Series/FPIx, D/T/LS/LF Cabinet
S Cabinet
421270: EN1001-Series, S Cabinet
421270-001: EN1001-Series, S Cabinet, 380VAC
421270-002: EN1001-Series/232, S Cabinet
421270-003: EN1001/1/2-Series, S Cabinet
421270-007: EN1001-Series/485, S Cabinet
421270-008: EN1001/S49-Series, S Cabinet
D/T Cabinet with Ground Fault
421377: EN1001-300/GF, D/T Cabinet
421377-001: EN1001(TGA)-1200/GF/485, D/T Cabinet, with S Connector & 24VAC Valve Transformer
421377-002: EN1001(TGA)-1200/GF, D/T Cabinet, with or without S Connector & with 24VAC Valve Transformer
421377-003: EN1001-300/GF, D/T Cabinet, with CES Connector & 24VAC Valve Transformer
421377-004: NK1001-1200/GF, D/T Cabinet, with Connector for NIMAK Gun & 24VDC Valves
421377-005: EN1001-1200/GF, D/T Cabinet
421377-007: EN1001-1200/GF, D/T Cabinet, with CES Connector, 24VAC Valve Transformer & Circuit Breaker
421377-009: EN1001/ERG-1200, D/T Cabinet, with ERG Connector for ERGOLINE Gun & 24VDC Valves & Power Supply
421377-010: EN1001-1200/GF/SP, D/T Cabinet, SP=24VDC Valve Output
421377-011: EN1001/PW-1200, D/T Cabinet, with PW Connector for PW Gun & 24VDC Valves & Power Supply
C Cabinet
421499: EN1001-Series, C Cabinet
421499-001: EN1001-Series/485, C Cabinet
421499-002: EN1001-Series, C Cabinet, DC Valve Outputs

Detalles

Capacidades

  • 50 Diferentes Programas
  • Modo Encadenado y Sucesivo
  • Cedulas de soldar en modo Repetir / No repetir
  • Relevador de control para válvula y soldar
  • 3 Salidas para válvulas
  • Programación de múltiples soldaduras
  • Programación de cedulas para trabajos diferentes
  • Fácil de programar
  • Es posible programar solo las funciones necesarias

Opciones

Prestaciones

  • Secuencia para punto
  • Secuencia con pulsos
  • Rampa subida/bajada
  • Enfriamiento/Temple
  • Retardo de forja
  • Secuencia con múltiples intervalos de Suelda/múltiples niveles de Corriente.
  • Pre calentamiento / Post calentamiento
  • Selección externa de programas
  • Señales de Proceso y Error.
  • Secuencia de suelda por costura
 

Más Información

Permítenos Responder tus Preguntas acerca de EN1001